|
DCT4 Direct (v1.0.0.32):
- NHM-7 - 8310, v 6.20
- RH-19 - 3100, v 5.91
- NHL-6 - 6800, v 3.14
- RH-9 - 3510i, v 5.35
- RM-17 - 7260, v 3.36
- NEM-1 - 3300, v 4.62
- NPL-2 - 6100, v 5.80
- RH-23 - 7200, v 4.26
- NHL-4J - 7250, v 3.62
- NPE-4 - 6310, v 5.10
- NHL-4 - 7210, v 5.63
- NPL-1 - 6310i, v 7.00
- RH-37 - 3220, v 3.60
- RM-37 - 6610i, v 4.10
- NHM-8 - 3510, v 5.02
- RH-30 - 3200, v 5.29
- NHL-4JX - 7250i, v 5.30
- NKC-1 - 2270, v 9.07
- NPC-1 - 3320, v 4.00
- NPW-1PA - 3361*, v 3.06
- RH-17R - 2280, v F175V0500.nep
- DTE-1 - D211*, v 4.01
- RH-18 - 1100*, v 5.62
- NPM-10 - 3595, v 8.18
- NKC-1 - 1220, v 9.07
- NPD-1AW - 3585, v B100V0557.nep
- RH-44 - 3586, v D100V0112.nep
- RH-3 - 2285, v G101V0801.nep
- NPM-8 - 3590, v 7.64
- RM-12 - 7710, v Vp2.200
- RA-2 - 9500, v 3.35.2
- RH-38 - 1100a*, v 5.62
- NHL-9 - 6820a, V 4.25
- RAE-6 - 9300, v 3.06
- RH-48 - 3105, v J175V0300.nep
- NPL-3 - 6200, v 4.22
- RH-27 - 6225, v H190V0800.nep
- RH-50 - 3100b, v 4.03
Note:
The Supported Phones above marked with Star (*) sign do not operate properly with this version. Do not use them. In case you do and have a dead phone, just reflash the MCU to repair it(1100 - MCU+PPM).
IMPORTANT:
- Please note that the DCT4 DIRECT BOX cannot work with phones that:
- Have bad UEM data (30 sec off problem)
- Don't have any UEM data at all (?????????????? IMEI/ESN)
- Have SOftware/Hardware problems
- Please always check if phone is in full working condition before starting the IMEI/ESN change procedure.
- If you want to bring the phone back to it's original state, then you only need to flash the phone with origitnal MCU software. After MUC software update the patch will be erased and the phone will operate as before.
|
